Frequently Asked Question
Moxa Serial Server Setting
Last Updated 5 years ago
Moxa serial server must be
1. Assigned an IP and port. Default port is 4001. Command port is 966.
2. Firewall needs to be open for this ports if there are FW on the way.
3. In TCP server mode
4. RS-485 2 wire, 115200, 8/1/none, RTS/CTS
Radar needs to be configure in TCP Server mode. See attached file
1. Assigned an IP and port. Default port is 4001. Command port is 966.
2. Firewall needs to be open for this ports if there are FW on the way.
3. In TCP server mode
4. RS-485 2 wire, 115200, 8/1/none, RTS/CTS
Radar needs to be configure in TCP Server mode. See attached file
