Frequently Asked Questions

Configuring resolution, FPS & bitrate
Depending on the network you might need to configure the resolution, frames per second (FPS) and bit rate so that it fits your network. This can be done from Configuration - Configuration - Video/Audio (look at the attached screen shot below)
GovComm PTZ cameras have 3 streams - Main, Sub and Third stream. Make sure you configure and connect to the right stream.

Attachments: config_video_audio.png (175.4 kb) 

 Last updated Wed, Sep 23 2015 12:46am

Please Wait!

Please wait... it will take a second!